|
Post by Airpressure on Apr 8, 2006 17:36:47 GMT -5
Well my freinds just got a Mustang Cobra and we are planning on going to the strip with it. So we were wondering where we can get a blower with some quality? Also if you know of any other modsfor it just holla!
|
|
|
Post by kliff on Apr 8, 2006 19:17:04 GMT -5
Since you didn't say what year, or engine 302/5.0 or 4.7 SOHC, the question is kinda hard to answer......and bolting a blower on a used engine, if it isn't set up fo it, is not gonna be cost effective......when you start digging the crank out of the tarmac.
6-9K is a good budget to build a small blown Ford.....just do't forget the rest of the divetrain. Much cheaper to just put a 150hp shot of Nitrous on....tho it will also find any weak points in a used engine......
|
|
|
Post by arstchlvr on Apr 8, 2006 20:32:53 GMT -5
we just got a cobra too, and my bro said 3000 would get one. But he could buy a couple bolt ons for less and get up bout 125-145hp
|
|
|
Post by kliff on Apr 9, 2006 9:18:30 GMT -5
Yup, 3K will get you a blower.....but it doesn't do anything to the rest of the engine to "prep" it for the blower....good luck. we just got a cobra too, and my bro said 3000 would get one. But he could buy a couple bolt ons for less and get up bout 125-145hp
|
|
|
Post by Airpressure on Apr 9, 2006 18:45:01 GMT -5
Its an 2001
|
|
|
Post by kliff on Apr 10, 2006 7:26:37 GMT -5
You can get blower and all accessories right over the counter at Ford Dealerships! Guaranteed fit! Just go get the FoMoCo High performance catalog, and have a ball.
|
|